- HOME
- New Arrivals
- ALL PRODUCTS
- MANUALS
- DEALERS
-
HELP CENTER
-
FAQ
- Will the chronograph daybreak work with 43 cal balls?
- Why are triggers and selectors not effective in all cases?
- T238 Storm works with red bbs?
- Have a question about the Daybreak tracer/chronograph. Is there a way to keep the screen off when in use? For instance, does the screen turn on when I fire?
- How do I reset the FCU to factory settings?
-
Fire control failure
- DTU Troubleshooting Manual
- V3 DTU Compatibility Category
- V2 DTU Compatibility Category
- V2-1.42 Troubleshooting
- V2-1.7 Troubleshooting
- V2-2.0 Manual and Troubleshooting
- T238 DTU V3 Light Sensor Version Manual and Troubleshooting
- Why T238 DTU V2 BASIC(V1.9) For V2 Gearbox in single shot it is full auto fire. In full auto mode it is single shot.
- What is the maximum discharge rate (c-value) supported by the V2 1.42 ?Will 11.4v/40c batteries work?
-
Motor Trouble Manual
- Motor Compatibility
- Why aren't brushless motors compatible with other brands of etu/mosfet?
- Motor Failure Example Answer
- What is the difference between T2 and T3 motors? Which one has more torque?
- Why does a 2520KV blue motor work in half-run but then often randomly stops working and will not run at full speed?
-
FAQ
-
FAQ
- Will the chronograph daybreak work with 43 cal balls?
- Why are triggers and selectors not effective in all cases?
- T238 Storm works with red bbs?
- Have a question about the Daybreak tracer/chronograph. Is there a way to keep the screen off when in use? For instance, does the screen turn on when I fire?
- How do I reset the FCU to factory settings?
-
Fire control failure
- DTU Troubleshooting Manual
- V3 DTU Compatibility Category
- V2 DTU Compatibility Category
- V2-1.42 Troubleshooting
- V2-1.7 Troubleshooting
- V2-2.0 Manual and Troubleshooting
- T238 DTU V3 Light Sensor Version Manual and Troubleshooting
- Why T238 DTU V2 BASIC(V1.9) For V2 Gearbox in single shot it is full auto fire. In full auto mode it is single shot.
- What is the maximum discharge rate (c-value) supported by the V2 1.42 ?Will 11.4v/40c batteries work?
-
Motor Trouble Manual
- Motor Compatibility
- Why aren't brushless motors compatible with other brands of etu/mosfet?
- Motor Failure Example Answer
- What is the difference between T2 and T3 motors? Which one has more torque?
- Why does a 2520KV blue motor work in half-run but then often randomly stops working and will not run at full speed?
Môj účet
Pošleme vám e-mail na obnovenie hesla.
