T238 vision is to become an interesting company, with a mission to continuously output creativity and fun!
T238 AEG Spiral Gear Set Pro Edition
T238 AEG Spiral Gear Set Pro Edition
The T238 Gear Set Pro Edition is a gear set specifically designed for professional AEG players. It features three commonly used gear ratios and utilizes spiral gear design for the bevel gear and pinion gear, providing enhanced load-bearing capacity and noise reduction. The delayed tappet plate control pin design prevents the nozzle from retracting prematurely at high rates of fire, avoiding gas loss. The second gear adopts a half-height design, increasing the tolerance for gear meshing at high rates of fire and reducing gear wear.
Gear Ratio:
9:1 Ultimate High Speed (Recommended for springs M180 and under)
13:1 Super High Speed (Recommended for springs M110 and under)
16:1 High Speed (Recommended for springs M150 and under)
18:1 High Torque (Recommended for springs M180 and under)
Compatibility: Most Standard AEG Gearboxes (M4, AK, MP5, G36, P90, and Other Compatible Models)
Package Includes: Spur Gear, Sector Gear, Bevel Gear, Pinion gear set
If you need the gear puller, please click on the link:
T238 CNC STEEL GEAR SET
- SPIRAL BEVEL & PINION
- HIGH STRENGTH
- LOW NOISE
- 40CR STEEL
Attention!
Install sufficient shims on the bevel gear to ensure full meshing engagement with the pinion gear.
T238 CNC STEEL GEAR SET
- SPIRAL BEVEL GEAR
- SPIRAL PINION GEAR
Features
- 40CR STEEL CNC MACHINING QUENCHING TECHNOLOGY
- WIRE-CUT SPIRAL PINION GEAR
Features
- ENHANCED LOAD BEARING & NOISE REDUCTION
SECTOR GEAR IS AOE CORRECTED
- DELAYED TAPPET PLATE CONTROL PIN (PREVENT NOZZLE AIR LOSS)
- ORIGINAL
HALF HEIGHT 2ND TOOTH
- INCREASE THE TOLERANCE FOR GEAR MESHING ATHIGH ROF
GEAR TEETH CHAMFERING
REDUCES THE FRICTION AREA BETWEEN GEARS AND LOWERS NOISE
9:1 DSG SUPER-SPEED GEAR SET
- UNLOCK 50+ RPS PERFORMANCE!
PRECISION CNC MACHINED
- HEAT TREATED FOR IMPROVED STRENGTHAND DURABILITY
RELIABILITY
- MATERIAL: 40CR STEEL
- ROCKWELL HARDNESS: 38-42HRC
PROPER MESHING & WELL BALANCED AT HIGH ROF
Gear Ratio
9:1 Ultimate High Speed (Recommended for springs M180 and under)
13:1 Super High Speed (Recommended for springs M110 and under)
16:1 High Speed (Recommended for springs M150 and under)
18:1 High Torque (Recommended for springs M180 and under)
Frequently Asked Questions
Frequently Asked Questions
Clarify any uncertainties you might have, ensuring a smooth and hassle-free experience for everyone.
Will the chronograph daybreak work with 43 cal balls?
Only works on airsoft/gelball/foam dart.
This inner diameter is only 14mm, can only be used with calibers smaller than 14mm.
Why are triggers and selectors not effective in all cases?
The causes are as follows:
1. Battery failure
2. Poor contact of the battery plug
3. It is recommended to change the battery to troubleshoot
4. If you still can't solve the problem, please contact: support@t238.net
Can T238 Storm works with red bbs?
It's not allowed to be used! Green only!
Have a question about the Daybreak tracer/chronograph. Is there a way to keep the screen off when in use? For instance, does the screen turn on when I fire?
You can set auto display off to 5s. and when you fire, the screen will auto-turn back on.
How do I reset the FCU to factory settings?
Click the reset button in FCU settings.
Is the IMPULSE rated for 30c continuous discharge and 60c sudden discharge?
It's 42A/84A for 1400mAh battery and 33A/66A for 1100mAh battery.
Our Best Selling
