T238 vision is to become an interesting company, with a mission to continuously output creativity and fun!
T238 BL-480 Adjustable Brushless AEG Motor
Upgrade Your Gameplay, Elevate Every Battle.
This high - performance, adjustable motor elevates AEG replicas & gel ball blasters. For competitors and milsim fans, it brings instant trigger response, top - notch efficiency, and unbeatable durability—ideal for DMR, CQB & speedsoft.
Compatible with T238 DTUs, 3 KV options, 50% - 100% RPM tuning. Enjoy fast response, efficiency, low heat, no maintenance.
DTU
Designed to sync flawlessly with the BL-480 motor. No braking conflicts, just seamless performance—elevate your control.
Tracer Unit
Pair with the airsoft for precision and visibility. Track every shot with unmatched clarity, only from T238.
Innovative Design for Maximum Comfort
Why Choose T238 Brushless Motor?
Proven in competition, trusted by pros. Built to outperform—plug-and-play, no gearbox tweaks needed.
Proven In Competitive Play
Trusted by Milsim and Speedsoft teams
Engineered For Extreme Performance
Outlasts brushed and budget brushless motors
Plug-and-play Upgrade
No gearbox modifications needed
Designed for competitive players and milsim enthusiasts
- Instant trigger response
- Ultra-high efficiency
- Unmatched durability
- Drop-in replacement for standard 480 brushed motors
Built-in Speed Adjustment
- 50%~100% RPM tuning
WARNING!
Do not continuously rotate the potentiometer!
It is recommended to rotate it 10 degrees at a time,
then power on and test until the optimal speed is achieved
Three KV options for different play styles
- DMR
- SPEEDSOFT
- HIGH ROF builds
The T238 BL-480 brushless AEG motor is a high-performance, fully adjustable upgrade for AEG replicas and gel ball blasters. Designed for competitive players and milsim enthusiasts, it delivers instant trigger response, ultra-high efficiency, and unmatched durability—making it the ultimate choice for DMR, CQB, and speedsoft builds.
Fully Compatible With T238 DTU Series
- No need to disable active braking
Compatibility Notes:
Gearboxes: V2/V3 (Verify shaft length before installation)
T238 Ecosystem: Works flawlessly with T238 DTUs (no braking conflicts)
Battery Systems: 2S/3S LiPo (XT60/T-Dean connectors recommended)
Ultra-Fast Response & Precision Control
- Response delay - As low as 4ms under heavy load
- 32-bit MCU @ 48MHz - ensures smooth, real-time adjustments
- One-step buck-boost drive (No inefficient voltage conversion)
Robust Structural Design
- NMB high-speed bearings (Rated for 60,000 RPM)
- ©Fully sealed housing (Dustproof, and shockproof)
Premium Materials & Construction
- Hand-wound pure copper windings (Maximizes slot fill rate)
- Kawasaki 0.15mm ultra-thin silicon steel laminations (Minimizes core loss)
- 45SH-grade high-temp neodymium magnets (No demagnetization under heat)
- Alloy steel hardened shaft (Extreme durability & torque resistance)
Advanced Safety & Protection
T238 Brushless Motors feature smart protections like overheat, low voltage, rotor lock, and power failure stop—ensuring reliable and safe performance every time.
Undervoltage Protection
Overcurrent Protection
Overheat Protection
Stall Protection
Auto-detection Of Battery Cell Count Protection
(Prevents LiPo damage)
6-layer 2oz Copper PCB
(Superior current handling & EMI resistance)
- Ultra-fast response (No brush lag)
- High efficiency (Reduced energy loss)
- Low heat generation (Sustained performance)
- Maintenance-free (No brush wear or replacement needed)
Technical Specifications & Performance Display
At a Glance
What's in the Box
- Motor Type: Sensory Brushless (3-phase)
- Shaft Options: Long Shaft (LS) / Short Shaft (SS)
- Speed Adjustment: 50%~100% via built-in potentiometer
- Input Voltage: 6V-12.6V (2S-3S LiPo)
- Bearing Type: NMB Japan (60,000 RPM rated)
- ESC Protection: Undervoltage, Overcurrent, Overheat, Stall protection
- Compatibility: V2/V3 gearboxes, T238 DTU series
- 1 * T238 BL-480 Brushless Motor
- 1 * 1.3mm Hex Key
- 1 * Motor Connectors Pack
Attention:
The included 1.3mm hex driver is strictly for pinion gear removal only. Do NOT use it for Motor end-cap disassembly, or Potentiometer adjustment.
Ready to Dominate the Field?
Upgrade to T238 Brushless Motor today and experience the future of AEG performance!
Critical Warnings
- Do not disassemble the motor
To prevent damage to the ESC (Electronic Speed Controller)
- Do not reverse battery polarity
Permanent damage to the ESC will occur.
- Incompatible with third-party ETUs featuring active braking
Permanent damage to the ESC will occur.
- Avoid prolonged no-load operation at maximum RPM
Risks rotor bearing failure.
- Maximum input voltage: 12.6V (3S LiPo)
Exceeding this voltage will damage the ESC.
Specifications
Warning
Maximum Power
380W
Input Voltage
6V-12.6V (2S-3S LiPo)
Voltage State
11.1V
Speed
33000 rpm (No Load Status)
28500 rpm (Load Status)
Current
1.8A (No Load Status)
20A (Load Status)
Long Axis
For M4/M16/MP5/G3/P90 and other long-type motor AEGs
Short Axis
For AK/G36/AUG and other short-type motor AEGs
Package Including
1 * T238 BL-480 Brushless Motor
1 * 1.3mm Hex Key
1* Motor Connectors Pack
This brushless motor is best to use our brand ETU/MOSFET, not compatible with other brands of ETU/MOSFET, if the use of other brands of ETU/MOSFET causes motor failure, no warranty.
—— Do not use ETUs of other brands!
—— Do not power the motor in an unloaded state!
—— Do not reverse connection of positive and negative poles!
—— Do not use batteries greater than 12.6V!
Frequently Asked Questions
Frequently Asked Questions
Clarify any uncertainties you might have, ensuring a smooth and hassle-free experience for everyone.
Why aren't brushless motors compatible with other brands of ETU/Mosfet?
Because the brake function of other brands of ETUs can damage the ESC (control board) of brushless motors, unless the function can be turned off.Otherwise, it cannot be used.
What is the motor compatibility?
Warning!!! This brushless motor is best to use our brand ETU/MOSFET, not compatible with other brands of ETU/MOSFET, if the use of other brands of ETU/MOSFET causes motor failure, no warranty.
- Do not use ETUs of other brands!
- Do not power the motor in an unloaded state!
- Do not reverse connection of positive and negative poles!
- Do not use batteries greater than 12.6V!
Brushless motor 2980KV/33000RPM long, when power is applied, it only makes a constant ticking sound! What does this mean?
- Low voltage.
- Block rotation.
- Overheating.
What should I do when the motor is not working?
- Replace the battery and try it fully charged.
- Connect the brushless motor directly to the battery and test whether the motor is normal or not.
I have no way of knowing the RPM of the potentiometer, what should I do?
Example: I received the motor, but when I took it out of the box, the potentiometer used to set the RPM spun freely without any end stops or any legs. Therefore, I have no way of knowing the RPM of the potentiometer.
Cause of Failure：
- Do not rotate continuously; it will damage the end stops.
- The end stops have a weak cueing effect, so watch your strength when rotating them.
- Works fine without end stops and can be connected to a battery to adjust speed.
I have a helical gear ratio of 100:200 or 100:300 which is a high torque setup, what motor should I choose?
To maintain a decent trigger response, we suggest you start with the T238 brushless motor of 2980KV / 33000RPM Long type and gradually tweak the speed control adjustment knob to find the best sweet spot.
Our Best Selling
