T238 DTU V2 QUALITY(V1.42) For V2 Gearbox

Describe:

The T238 digital trigger unit V2 QUALITY(V1.42) for V2 gearbox is a programmable MOSFET module. Specifically designed for AIRSOFT, Gel Ball Blaster, and other V2 standard gearboxes with semi-auto and fully-auto functions, such as Jin Ming J9, LDT HK416, Jing Gong M4A1, QINGLIU AIRGUN M4, G&G ARP9, Novritsch SSR4/SSR9. 

Functions:

3. Programmable shooting mode. The system includes multiple shooting mode, these modes can be programmed and selected by selector switch.

4. Auto-loading function is designed for gel ball blaster magazines with motor inside, when changing the magazine, the magazine motor will run automatically for few seconds. 

5. Pre-cocking. The default position of the piston is adjustable in semi-auto mode by delaying braking. Pre-cocking function can reduce excitation delay and increase trigger response speed.

6.MOSFET overheat protection. When the MOSFET overheats, the motor will not rotate after triggering the trigger and will sound a beep to indicate. After the MOSFET cools down, the system returns to normal.

7. Low battery protection. The system will automatically detect the number of battery cells and provide low-voltage protection, with a default protection voltage of 3.2V.

8. Active braking. The energy that support the active brake function comes from the inertia of motor,  timely stop the piston. The effect of active brake is significant on high torque motor.

9. Block-up protection. When gearbox Block-up occurs, the system stops working and emits an elongated 'beep' sound. Please check the gearbox immediately by power off. 

Main parameters:

• Size: 45*30*9mm
• Operating voltage: 6-16.8V
• Short circuit protection
• Active brake tech
• Binary trigger and multiple rounds burst mode
• MOSFET overheat protection
• Maximum start current is 300A, maximum brake current is 100A, maximum magazine drive current 30A

Package Content:

• V2 QUALITY digital trigger unit X1
• Manual X1
• Warranty X1
• Badge X1
• Small bag accessories X1

Note:

This product requires soldering and wiring. It is recommended that installation is undertaken by an experienced technician.